Peugeot 205 Gearchange Rods (3-rod kit)

Peugeot 205/309 Adjustable Quickshift for all 205 GTI and 309 GTI Models.
The adjustable quickshift is a direct replacement for the standard L-Lingage attached to the subframe.

Peugeot 205 / 309 Bronze L-linkage Pivot Bush Kit

Peugeot 205/309 Bronze Gearstick Pivot Bushes
These bronze bushes replace the standard plastic ones found in the gearstick pivot point.

Reproduction Air Box Bracket Peugeot 205 GTI/CTI Powdercoated black

One Pair Of Driveshaft / Diff seals to fit both left & right side
Suitable for Peugeot 309 205 GTi CTi models & diesels

Due to their location the steel fuel lines on the 205 Gti are prone to rust.

Using original OE under body fuel lines we have re-manufactured them using a CNC tube bender.
Using CNC technology ensures their complicated shape is…

205 8v LHD Rubber Coolant Hoses Kit

Inner wing coolant pipe made of stainless steel, for all types Peugeot 205 with XU engine!

Lower cambelt cover for Peugeot 205 GTI and CTI.

Fast Road Engine Mounting Kit for 205, these mounts are the same proven design as the Grp.N set-up but with a softer grad of rubber to aid compliance. A great upgrade for people looking to tighten up the engine movement but…

205 Grp.N Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and…

Oil Filter Block Fitting for Peugeot 205 1.6 1.9 CTI GTI

These fittings are screwed into the block, then either a heat exchanger “take off” block or oil cooler set-up screws onto them.

They are easily damaged while trying to…

Shims are placed behind buffers to space them closer to the top engine mount.

Available for: 205 1.6/1.9 GTI, 205 XSThe kit comprises of the following:

∙ 2 x 1.5 mm shims
∙ 2 x 3 mm shims
∙ 2 x 5 mm shims

Mild steel with…

OE style rubber brake servo hose with protective overbraid. Cut to include small section for the vacuum sunroof equiped models. Included 4x 16mm cobra clips.

If the original cam cover bolts are over tightened they can have a tendency to become weak and break. Since Peugeot ceased selling this part we have found there has been a demand for these. We now offer this complete set, chrome…

Set of 3 air induction hoses for Peugeot 205 GTI and CTI, all models and years. Split induction hoses are started to become and issue on the 205 GTI and CTI. Original 30+ year old rubber hoses are craking and causing air leaks…

This bush is designed and manufactured to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment's Grp.N Full Engine…

This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups. Fits all Peugeot 106 and 205 models incl. GTI…

These rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

They are sold as a pair:∙ The short hose runs from the steel fuel line to the bottom of the fuel filter
∙ The longer hose runs…

A direct replacement for the original part. This fitting holds the sandwich plate for the oil cooler (air) to the block.

The hex fitting used to tighten / loosen this part becomes worn overtime.

Suitable for: 205 1.6/1.9 GTI

These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible.

The kit comprises of following 5 hoses:∙ Main Filler Hose
∙ Cam Cover To Block
∙ Filler Tower To Block
∙…

Direct replacement hoses for the "Supplementary Air Device" system found on all pre-CAT 205/309 GTI's. These hoses are the same for RHD and LHD models. These hoses are suitable for all 205/309 1.6/1.9 GTI's.

Fitment: all 205/309 GTI's fitted with Jetronic fuel injection (Years: 86-91)

These are re-produced bungs originally found on the air flow meter.

Very few 205 and 309 GTI's still have the bung in place.

These will be a great…

Reproduction coolant expansion tank for Peugeot 205 and 309 models with TU engine.

Peugeot 205 GTI oil cooler, direct replacement for the 1.9 205 GTI versions without P.A.S.

Set of reproduction cowling spring for Peugeot 205 XU models. Made from galvanised steel. Price is for a set (2 springs.)

Rubber pads coming soon!

Original refurbished air filter box for Peugeot 205 GTI and CTI 8V engines. These do have a double layer of semi gloss black powdercoat.

We also sell the brackets:…